_________________________________________________________
Prologue and Work on the Drawings
My story of how it all began and how I collected and calibrated the anatomy drawings to the dimensions of the model from the kit.
_________________________________________________________
Full Rigging (masts, yards, and sails) of the Naval Cutter Alert 1777 by serikoff
A manual with diagrams and drawings of all rigging, and the diameters of all ropes.
_________________________________________________________
Cutter Alert 1777 Trident Model's Kit Review 1:48 (from AliExpress)
A detailed review of the kit, highlighting the differences between the regular kit and the one from AliExpress.
_________________________________________________________
1st Hull
1 - Frames
2 - Keel
3 - Assembly: Slipway, Stern
4 - Assembly: Frames
5 - Interior Planking
6 - Lower Deck p.1
7 - Lower Deck p.2
A detailed overview of the making process of the 1st hull parts (PoF) skeleton.
_________________________________________________________
2nd Hull
8 - 2nd Hull. Frames. Keel
9 - Carvel Planking
10 - Clinker Planking
Creating a 2nd ship hull based on 3D scans of the 1st. Railing-sill, Wales, Hull Planking.
_________________________________________________________
1st | 2nd Hulls
11 - Upper Deck (1st hull)
12 - Upper Deck (2nd hull)
Assembly of the upper deck from beams, carlings and ledges (1st); and deck planking, waterway and mast stops (2nd).
_________________________________________________________
1st | 2nd Hulls
13 - Gratings
14 - Hatchways
3D modeling and making of Gratings and Hatchways for two hulls in parallel.
_________________________________________________________
2nd Hull | (1st)
15 - Nails and Bolts
16 - On the Decks p.1
1) Lower Deck (cabins), 2) Lower Deck Gratings and Hatches, 3) Nailing Calculations, 4) Bowsprit and Mast, 5) Upper Deck Main Grating (refit).
17 - On the Decks p.2
6) Rudder, 7) Bowsprit Pins (for both hulls - FBH), 8) Bitt Pins (FBH), 9) Flue (FBH), 10) Platform Deck, 11) Shaped Rails.
18 - On the Decks p.3
12) Fitting gratings and hatches to the deck, 13) Bitumen coating of the lower deck, 14) test Interior Lighting., 15) Deck Nailing (plugs), 16) Waterways 17) Scuppers.
Manipulations that were carried out with the second hull on its decks.
_________________________________________________________
1st Hull
19 - Planking (1st hull)
20 - Decks (1st hull)
Making: Gun Ports, Wale, Planking Clinker Carvel, Nailing, Bolting, Scuppers. | Making: Lower deck Grating frames, deck Knees, Sill rails, Waterways, Nails and Scuppers, Ladders.
_________________________________________________________
1st | 2nd Hulls
21 - Tests: Galvanization and Blackening
22 - 3D Modeling and 3D Printing
23 - Rigging tests. Cable-Rope Machine
24 - Display Cases for Models
Development of a copper coating machine for plastic parts. Copper plating and blackening tests. 3D modeling and SLA printing..
_________________________________________________________
1st | 2nd Hulls
25 - Working with Metal
1) COPPER PLATING. Galvanizing. 2) Rudder. (First hull). 3) Rudder Hinges. 4) BLACKENING. 5) Bolts Imitation. 6) Horseshoe and Fish plates.
26 - On the Decks p.4
7) Gratings and Hatchways (2nd hull). 8) Pumps. 9) Flue (2nd hull). 10) Windlass rigging bits
27 - On the Decks p.5
11) Anchor Windlass. 12) Lower Decks